Maserati 4200cc F136 UC - F136 UD

Engine Overhaul

Assembly Procedure

Place the seal gasket between the heat exchanger and the crankcase and install the heat exchanger.

CAUTION!

During assembly of the water/oil heat exchanger, it is good practice to visually inspect the condition of the cooler element. Carefully clean the component so as to guarantee maximum heat dissipation during operation. To ensure there are no leakages or bleeding, before assembly perform a press test by immersing the heat exchanger in a container of water, plugging one of the two intakes and blowing air in through the other intake.

3 14 x screws TCEI M6x25 with washer. Tightening Torque: 10Nm 4 5 x screws TCEI M6x30 with washer for fastening to oil intake area. Tightening Torque: 10Nm

Maserati Academy

82