Maserati 4200cc F136 UC - F136 UD

Engine Overhaul

Assembly Procedure

Fasten the section of cabling which connects to the starter motor, AC compressor and oil level sensor etc. on the left hand bank side. Use clamp with sheath and screw TCEI M6x12. Tighten to the prescribed torque: 10Nm.

Fasten the cables under the timing cover using two clamps with sheath and screws TCEI M6x12 Tighten to a torque of 10Nm.

Fasten the cables in the area under the AC compressor using two clamps with sheath and screws TCEI M6x12 Tighten to a torque of 10Nm. Attach the connector to the AC compressor.

Maserati Academy

117