Maserati 4200cc F136 UC - F136 UD

Engine Overhaul

Assembly Procedure

HYDRAULIC STEERING ASSEMBLY

Fasten the hydraulic steering pump to the crankcase using the following fastening screws: 1 x screw TCEI M6x35 with washer Ø 6-12x1.2 (for fastening pump cover to crankcase) 1 x screw TCEI M8x95 with washer Ø 8x-16x1.4 (for fastening pump in first hole on pulley side) 1 x screw TCEI M8x35 with washer Ø 8x-16x1.4 (to fasten pump in second hole on pulley side) Tighten the fastening screws using a torque wrench: M6 tightened to 10 Nm ; M8 tightened to 25 Nm .

Maserati Academy

108